Instantly transfer radar, chartplotter, fishfinder, and navigation functions between E Series displays with SeaTalkhs.
-
Network E Series displays in dual or multi display combinations
-
Simple setup, SeaTalkhs is plug and play
-
100 Megabit data transfer speed
-
Full data transfer and control
-
No IP protocols or IT professional required
-
Raymarine SeaTalkhs high speed switch enables connection of up to eight devices on the network
Configuring Your E Series System with SeaTalkhs
Configuring your E Series system is a simple as determining which features you'd like to have (chart, radar, sonar, video) and where you would like to see them. The powerful SeaTalk hs network supports up to seven E Series displays plus the DSM300 sounder module (or eight displays without a DSM300.)
Configuring a Basic E Series System
The most basic E series system consists of an E80 or E120 display, and a DSM300. Using a SeaTalkhs Crossover coupler, we can quickly and easily connect them together. Because the components are all auto sensing, there is no complicated setup required. Simply plug them in. If you're not using a DSM300, you can link any two E Series displays with the crossover coupler too. Figure 1 illustrates the usage of the Crossover Coupler.
Figure 1: For networking only two devices choose the SeaTalkhs crossover coupler.
Configuring a Multistation E Series System
In a multistation E Series, we are connecting any three to eight SeaTalk hs devices together using the SeaTalkhs Network Switch. Again, the auto sensing SeaTalkhs components make setup a breeze ...simply plug them in. SeaTalkhs does the rest.
Figure 2: When networking three to eight SeaTalkhs devices, use the SeaTalkhs Network Switch.
E Series Model Lineup
Two display sizes to choose from:
