Part Number: T70330
The Evolution ACU150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruising powerboats with hydraulic steering. EV-150 system is engineered specifically to meet the needs of small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. in.( 80cc) and 14.0 cu in (230cc).
The EV-150 system is for 12-volt DC electrical systems only. The system comes complete with our p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit.
The EV-150 System Pack Contains:
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems.
SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
The Raymarine ACU-150 is a component of the Evolution™ Autopilot system and is designed to provide power and control to a Raymarine Type-1 Hydraulic Drive Unit (M81120.)
The ACU-150 connects to the SeaTalkng network for communication with its other peripherals. It also has connections for an optional Rudder Reference Unit (sold separately.) The ACU-150 works on 12-volt DC systems only.
The p70R / p70Rs autopilot control head is designed for power craft with push buttons and a rotary control dial. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions.
The p70R / p70Rs control head also features the LightHouse user interface and a start up wizard to help you configure the pilot quickly and easily.
The Type 1 Hydraulic Pump is intended to operate the boat’s steering mechanism as part of a Raymarine autopilot system. It is primarily designed for use on boats with an existing hydraulic steering system. Alternatively, you can use this pump on a boat with mechanical steering in conjunction with a secondary steering ram.
The hydraulic pump contains a precision gear pump and a check valve driven by a servo motor.
The Evolution SeaTalkng cable kit contains
CABLING KIT | |
Part Number | R70160 |
ng Power Cable (0.4m) | ![]() |
1 x SeaTalkng Backbone Cable (5m) | ![]() |
1 x SeaTalkng Spur Cable (0.4m) | ![]() |
1 x SeaTalkng 5-way Connector Block | ![]() |
2 x SeaTalkng T-piece Connector | ![]() |
2 x SeaTalkng Terminator | ![]() |
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems.
SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
The Raymarine ACU-150 is a component of the Evolution™ Autopilot system and is designed to provide power and control to a Raymarine Type-1 Hydraulic Drive Unit (M81120.)
The ACU-150 connects to the SeaTalkng network for communication with its other peripherals. It also has connections for an optional Rudder Reference Unit (sold separately.) The ACU-150 works on 12-volt DC systems only.
The p70R / p70Rs autopilot control head is designed for power craft with push buttons and a rotary control dial. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions.
The p70R / p70Rs control head also features the LightHouse user interface and a start up wizard to help you configure the pilot quickly and easily.
The Type 1 Hydraulic Pump is intended to operate the boat’s steering mechanism as part of a Raymarine autopilot system. It is primarily designed for use on boats with an existing hydraulic steering system. Alternatively, you can use this pump on a boat with mechanical steering in conjunction with a secondary steering ram.
The hydraulic pump contains a precision gear pump and a check valve driven by a servo motor.
The Evolution SeaTalkng cable kit contains
CABLING KIT | |
Part Number | R70160 |
ng Power Cable (0.4m) | ![]() |
1 x SeaTalkng Backbone Cable (5m) | ![]() |
1 x SeaTalkng Spur Cable (0.4m) | ![]() |
1 x SeaTalkng 5-way Connector Block | ![]() |
2 x SeaTalkng T-piece Connector | ![]() |
2 x SeaTalkng Terminator | ![]() |
2018 © FLIR Systems All rights reserved. Privacy Policy|Copyright Policy|Terms of Use