Software for Raymarine VHF Radios

  • Software for:
    Ray50, Ray52, Ray60, Ray70, 2nd Station Handset
  • Version:
    v1.35 Application / v2.15 Bootloader / VH1.06 handset
  • Date Released:
    August 2016
  • Additional Notes:
    The Bootloader must be loaded into the Radio before the Application. If a 2nd Station Handset is installed, it must also be upgraded.
 

DOWNLOAD LATEST VERSION NOW

Select the software update below depending on which Multifunction Display (MFD) you will be using to perform the Remote Update.

Before You Update


Warning: a/c/e/eS/gS Series - Updating via a/c/e/eS/gS Series display. MFD software must be at level v14.36 and above - Click here to update your MFD

Warning: G Series - Updating via G Series system. System software must be at level v4.49 and above - Click here to update your MFD

Current MFDs

 

a/c/e/gS Series

a/c/e/gS Series Software | Raymarine by FLIRVHF-v1.35 Boot-v2.15 

eS Series

eS SeriesVHF-v1.35 Boot-v2.15 
 

Retired / Legacy MFDs

 

A Classic

A ClassicDownload  

C Classic

C ClassicUnavailable  

E Classic

E ClassicDownload  

C Wide

C WideDownload  

E Wide

E WideDownload  

G Series

G SeriesDownload  
 

Software Update Information


Info: a/c/e/eS/gS Download - This download now contains the following additional product updates: Radios – Ray50/Ray52/Ray60/Ray70/2nd Station Handset

Note: The application for the Radios Will Not be installed until the bootloader v2.15 has been installed (located in a seperate file) - see upgrade instructions.

Software History

 
Version Release Date Features
VH1.06 Aug 2016
  • Only compatible with Radio application v1.35 (or higher)
  • Improved screen refresh rate
  • Improved communications between Handset and Base
  • UI improvements
 
v1.35    Aug 2016
  • Only compatible with Radio bootcode v2.15
  • Improved the response speed of the 2nd Station Handset when in Watch mode
  • Improved communications between Handset and Base
  • Ray70 now correctly transmits PGN129801 when requested
  • Corrected an issue with Magnetic Variation (now receives it correctly)
 

v2.15

bootcode

Aug 2016
  • Once installed, this is only compatible with Radio application v1.35 (or higher).
  • Changes Radio ID to prevent the v1.35 application from being installed into the radio before the bootloader is installed.
  • Modifications to memory to support new Application code
 
v1.31 May 2016
  • INITIAL RELEASE for Ray52
  • Not applicable to the Ray50/Ray60/Ray70
  • Improved DSC error tolerance
  • Updated NMEA2000 DSC message (PGN129808)
  • General improvements to Water/Scan modes
  • General DSC improvements
  • Improved GPS position fix
  • Improved screen refresh rate
 
v1.24 Nov 2015
  • Release for Ray50, Ray60 and Ray70
  • Fixed issue found with the Loud Hailer Listen Back function (Ray70 only), where the Fist Mic signal could route back to the internal speaker, causing feedback.
  • Resolved issue with a static invalid position from a simulator, the position reported on the radio jumped every few seconds.
 

v2.09

Bootcode

Oct 2015
  • Upgraded Bootcode from v2.04 to v2.09, to enable E-Classic/C-Wide/E-Wide Series MFDs to upgrade the Radios (as well as a/c/e/es/gS Series).
 
VH1.04 Sept 2015
  • Aligned User Interface on handset with VHF application release v1.22
  • Added auto Fog Horn icon to status bar when enabled
 
v1.22 Sept 2015
  • Release for Ray50, Ray60 and Ray70
  • Improved AIS performance/decode for ROT, SOG, COG and AtoN
  • Fixed AIS issue with vessels above approx 55 degrees Latitude
  • Improves Auto Fog Horn mode
  • Corrects private channels 31, 37 and 96 for correct operation in ATIS and DSC modes
  • General other Bug fixes and improvements to UI
 
v1.13 May 2015
  • INITIAL RELEASE for Ray70
 
VH1.01 May 2015
  • INITIAL RELEASE for 2nd Station Handset
 
v1.06b Apr 2015
  • INITIAL RELEASE for Ray60
 
v1.04a Mar 2015
  • Ray50 release to address WX channel issue in USA
 
v1.04 Mar 2015
  • INITIAL RELEASE for Ray50