• Applicable for:  Ray260/Ray260e All variants 
  • Software Version: v2.04
  • Release Date: Nov 2016
  • Replaces: v2.03, v2.02, v2.00, v1.01
 

  

   

DEALER ONLY UPDATE

 

Software for this product is only available via a Raymarine Service Center or a Raymarine Service Dealer. End user updating is not possible due to restrictions in the hardware and/or regulations.

To locate your nearest center please use the dealer locator

 

DEALER LOCATOR

 


Operating Manual

 

 

 

 

IMPORTANT TERMS OF DOWNLOADING SOFTWARE

 

This firmware update process is done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.

If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

By Downloading the software, you agree to these terms.

 

 

 


 

Software History

  

Version

Release Date

 Features

v2.04

Nov 2016

  • Corrects an issue when performing a DSC Routine Ship-to-Shore call
 

v2.03

April 2014

  • AIS Data no longer transmitted on 4800 baud
  • Handset 'Hot Plugging' improved

v2.02

Jan 2014

  • Course Over Ground (COG) correction for the display of 360 and 0 degrees during a turn.
  • Improvements to the Multiple Data Source (MDS) cancellation process.
 

v2.00

Nov 2013

  • STng port now operational
  • AIS software operational (AIS model only)
  • Voicemail Feature enabled
  • Position Tracking Feature Enabled
  • Adjusted the passive speaker volume control intervals
  • Various fixes
 

v1.01

May 2013

  • Initial Release