Raymarine SeaTalk^hs Connections

SeaTalk^hs Plug and Play

By using SeaTalk^hs networking, you can instantly transfer radar, chartplotter, fishfinder, thermal imaging and navigation functions. Configuring your system is a simple as determining which SeaTalk^hs devices you'd like to have (chart, radar, sonar, video) and where you would like to see them.

Networking two devices

The most basic system may consist of a C Series Widescreen or an E Series Widescreen with a DSM30, DSM300 or a radar.

Using a SeaTalk^hs Crossover coupler, they can be quickly and easily connected together. Because the components are all auto sensing, there is no complicated setup required. Simply plug them in.

If you're not using a DSM, you can link any two E Series Widescreen displays with the crossover coupler too.

Multistation Networking - New HS-5 SeaTalk^hs Network Switch

SeaTalk^hs data is quickly distributed to other SeaTalk^hs using the HS-5 Network Switch.

The switch has 5 ports - 4 RayNet ports supporting 10 or 100 Mbit/sec network speeds and a 5th gigabit port allowing a higher speed across switches, should a 2nd switch be necessary.

Learn more

When networking three to eight SeaTalk^hs devices, the SeaTalk^hs Network Switch can be used.

The auto sensing SeaTalk^hs components make setup a breeze, simply plug them in. SeaTalk^hs does the rest.